Abbott Plastics: Materials


	Home > Materials > Rulon

Typical Properties of Rulon®

Property	Test Method	Rulon® LR	Rulon® J	Rulon® 641
*Mechanical Properties*
Density (lb/in³)	ASTM D792	0.082	0.070	0.081
Tensile Strength (p.s.i.)	ASTM D1457	1,500	2,000	2,000
Tensile Elongation At Yield (%)	ASTM D1457	150	180	175
Hardness, Shore D	ASTM D2240	60-75	60	60
IZOD Notched Impact (ft-lbs/in)	ASTM D256	6.0	-	-
*Thermal Properties*
Thermal Conductivity (BTU-in/ft²-hr-°F)	ASTM C177	2.30	1.70	2.60
Maximum Operating Temperature (°F)	-	500	500	500
Minimum Operating Temperature (°F)	-	-450	-450	-450
*Electrical Properties*
Dielectric Constant At 1 MHz	ASTM D150	2.5	2.4	-
Dissipation Factor At 1MHz	ASTM D150	0.003	0.001	-
Dielectric Strength (V/mil) short time, 0.8" thk.	ASTM D149	400-500	200	-
*Water Absorption Rates*
Water Absorption -24 hrs.(%)	ASTM D570	0	0	0

NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be
used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.

Abbott Plastics | 3302 Lonergan Drive | Rockford, IL 61109 | PH: 815.874.8500 | FX: 815.874.6297