Abbott Plastics: Materials


	Home > Materials > ABS

Typical Properties of ABS

Property	Test Method	ABS
*Mechanical Properties*
Density (lb/in³)	ASTM D792	0.038
Tensile Strength (p.s.i.)	ASTM D638	6,500
Tensile Modulus (p.s.i.)	ASTM D638	340,000
Tensile Elongation at Break (%)	ASTM D638	25
Flexural Strength (p.s.i.)	ASTM D790	11,000
Flexural Modulus (p.s.i.)	ASTM D790	320,000
Izod Impact (ft-lbs/in)	ASTM D256	7.0
Rockwell Hardness	ASTM D785	R105
*Thermal Properties*
Heat Deflection Temperature at 264 psi (°F)	ASTM D648	215
Maximum Operating Temperature	-	140
Coefficient of Linear Thermal Expansion (in/in/°F)	ASTM D696	0.000053
Flammability Rating	UL94	HB
*Electrical Properties*
Volume Resistivity (Ohm-cm)	ASTM D257	10¹⁵

NOTE: The information contained herein are typical values intended for reference and comparison purposes only. They should NOT be used as a basis for design specifications or quality control. Contact us for manufacturers' complete material property datasheets.

Abbott Plastics | 3302 Lonergan Drive | Rockford, IL 61109 | PH: 815.874.8500 | FX: 815.874.6297